ETC Echoflex Dual Tech Installation Manual page 5

Echoflex Installation Guide
Switch-mount Occupancy Sensor
Rotary and DIP Switches
Rotary and DIP switch settings are accessible on the rear of the station.
Set Space and Address
The two rotary switches provide for
assignment of the sensor space and address.
Each sensor must be set to a unique station
address for the assigned space. By default,
these switches are set to Space 1, Address 1.
Commands are shared by all devices within n
assigned space.
1.
Set the Space rotary switch to the
desired number (1 through 16) for the
space you want the sensor to control.
2.
Set the Address rotary switch to desired address (1 through 16) for the
sensor identification in the selected space.
3.
CAUTION:
unique number (1 through 16) for the space it controls. If two or more
devices use the same address for the same space, the system will not
function properly.
Dual Tech Switch-mount Occupancy Sensor
Each device on the bus must have its address set to a
Page 5 of 20 Echoflex Solutions, Inc.