Echoflex Installation Guide
Switch-mount Occupancy Sensor
Station Functionality
One Button Switch-mount Sensor
The one button switch-mount sensor offers control of a single preset or zone
as determined by the Function switch setting.
Factory Defaults
The one button switch-mount sensor ships from the factory in the following
default settings:
Rotary switches are set to Address 1, Space 1. Reference
•
DIP Switches on page 5
DIP switches 4 and 5 are set to On. All other switches are set to Off.
•
Reference
With the Function switch set to Preset, Preset 1 is the default.
•
With the Function switch set to Zone, Zone 1 is the default.
•
With the Function switch set to Custom, Zone 2 is the default.
•
Preset
In Preset mode, an occupancy detection event plays the preset that is
configured to button 1, and the vacancy detection event plays Space Off.
The one button switch-mount sensor supports the following button actions:
Note:
Reference
Dual Tech Switch-mount Occupancy Sensor
page 5
.
*When DIP switch 1 is set to On, Sequence toggle is enabled.
page 5
.
.
Double-tap the button to toggle the
preset using a 1/2 second fade time.
Page 15 of 20
Rotary and
Echoflex Solutions, Inc.