Further Information And Documentation - KEB COMBIVERT H6 Series Instructions For Use Manual

cERTIfIcATION
•
•
•

6.3 further information and documentation

Supplementary manuals and information to the download can be found at
www.keb.de/de/service/downloads
General manuals
•
•
Manuals for construction and development
•
•
•
Approvals and approbations
•
•
•
Other
•
•
70
Inverter copper conductors
07H6
10H6
12H6
13H6
14H6
15H6
20H6
21H6
22H6
24H6
25H6
These drive modules are only for use in combination with other supply and drive
modules that are part of the Combivert H6 series.
Maximum heatsink temperature for all H6 drive modules shall be maintained at 80°C
via a liquid cooled system.
Connection of an External Temperature Sensor was not evaluated.
EMC and safety instructions
Manuals for additional control boards, safety modules, fieldbus modules, etc.
Input fuses in accordance with UL
Programming manual for control and power unit
Motor configurator, to select the correct drive converter and to create downloads for
parameterizing the drive converter
CE declaration of conformity
TÜV certificate
FS certification
COMBIVIS, the software for comfortable parameterization of drive converters via a
PC (available for download)
EPLAN drawings
60°C or 75°C
75°C
60°C or 75°C