Setting The Pg/Pc Interface - Siemens SIMATIC S7-1200 Manual

4 Installation and Commissioning
No.

Choose "Use the following IP address".
3.

Select an IP address in the CPU's
subnet mask.

Confirm the settings with "OK" and
"Close".
4.2.1

Setting the PG/PC interface

Table 4-3
No.
1. Open the PG/PC interface settings via
"Start > Control Panel" to set the correct
access path for STEP 7 V15.

Select "S7ONLINE (STEP 7)" as the
application's access point.

Select your network card with
"(Parameter assignment of your NDIS
CP with TCP/IP protocol (RFC-1006))"
as the interface configuration used.
Confirm the settings with "OK".
Controlling several fans (ebm-papst) via Modbus RTU
Entry ID: 109476801, V2.0,
Action
Action
09/2018
Remark
Remarks
28