Siemens SED2 Commissioning Manual page 71

Data: Stator resistance value in [Ohms] for the connected motor (from line to line). The parameter value includes the cable
resistance. There are 3 ways to determine the value for this parameter:
1. Calculate using P0340=1 (data entered from rating plate) or P3900=1,2 or 3 (end of quick commissioning)
2. Measure using P1910=1 (motor data identification - value for stator resistance is overwritten)
3. Measure manually using an Ohmmeter
Note: Since measured line to line, this value may appear to be higher (up to 2 times higher) than expected.
The value entered in P0350 (stator resistance) is the one obtained by the method last used.
r0395 CO: Total stator resistance [%]
Displays stator resistance of motor as [%] of combined stator / cable resistance.
Unit: % Min: -
Note:
100% means: Z rated motor =
P0400 Select encoder type
Selects encoder type.
Unit: - Min: 0
Settings: 0=Disabled
1=Single channel encoder
2=Quadrature encoder without zero pulse
Note: The term "quadrature" in settings 2 and 12 refers to 2 periodic functions separated by a quarter cycle or 90 degrees.
P0409 Pulses per second at rated frequency
Sets number of pulses per second at rated speed.
Unit: - Min: 1
P0501[2] Type of sensor
Defines type of process variable sensor that each analog input is to be configured for. Note
that setting this parameter will in turn set P0756 (analog input mode). To switch between
voltage and current analog input modes also requires the DIP switches on the terminal board
to be set correctly. See description for P0756. See P0753 and P0756 to P0762 (ADC
conditioning).
Unit: - Min: 0
Settings: 0=No sensor selected
1=Sensor type QBE620 P1
2=Sensor type QBE620 P10
3=Sensor type QBE620 P16
4=Sensor type QBE620 P25
5=Sensor type QBE620 P40
6=Sensor type QBE620 P4
7=Sensor type QBE620 P5
8=Sensor type QBE621 P10U
9=Sensor type QBE621 P25U
Index: P0501(Index 0): VSD in "Auto" mode
Details: See P0753 and P0756 up to P0762 (ADC parameterization).
If Setting 29: PID setpoint and feedback are °C
P0506[10] Parameter list
This parameter performs no function within the VSD. It is a storage place for use with the AOP
for a list of parameters to scale.
Unit: - Min: 0
Index: P0506[0]: Parameter 1
P0506[1]: Parameter 2
P0506[2]: Parameter 3
P0507[3] Scalar values
This parameter performs no function within the VSD. It is a storage place for use with the AOP
to scale particular parameters.
Unit: - Min: 0
Index: P0507[0]: Scalar numerator
P0508[4] Unit
This parameter performs no function within the VSD. It is a storage place for use with the AOP
to store a string for unit.
Unit: - Min: 0
Index: P0508[0]: Unit character 1
P0509[12] String
This parameter performs no function within the VSD. It is a storage place for use with the AOP
to store a string for parameter unit description.
Unit: - Min: 0
Index: P0509[0]: String char 1
P0509[1]: String char 2
P0509[2]: String char 3
P0601 Motor temperature sensor
Selects motor temperature sensor.
Unit: - Min: 0
Settings: 0=No sensor
Dependency: If "no sensor" is selected, motor temperature monitoring occurs based on the estimated value of the thermal motor model.
Siemens
Building Technologies
Def: -
P0304 (rated motor voltage)
P0305 (rated motor current)
Def: 0
Def: 25
Def: 0
10=Sensor type QBE63 DP01
11=Sensor type QBE63 DP02
12=Sensor type QBE63 DP05
13=Sensor type QBE63 DP1
14=Sensor type QBE64 DP4
15=Sensor type 0 TO 1 INCH WC
16=Sensor type 0 TO 2 INCH WC
17=Sensor type 0 TO 2.5 INCH WC
18=Sensor type 0 TO 3 INCH WC
19=Sensor type 0 TO 5 INCH WC
Def: 754
P0506[3]: Parameter 4
P0506[4]: Parameter 5
P0506[5]: Parameter 6
Def: 1.0
P0507[1]: Scalar denominator
Def: 0
P0508[1]: Unit character 2
Def: 0
P0509[3]: String char 4
P0509[4]: String char 5
P0509[5]: String char 6
Def: 0
1=PTC thermistor
Commissioning Guide
10 Parameterization
Max: -
Max: 12
3=External pulse train
12=Quadrature encoder with zero pulse
Max: 500
Max: 51
20=Sensor type 0 TO 10 INCH WC
21=Sensor type 0 TO 10 PSI
22=Sensor type 0 TO 15 PSI
23=Sensor type 0 TO 25 PSI
24=Sensor type 0 TO 30 PSI
25=Sensor type 0 TO 50 PSI
26=Sensor type 0 TO 60 PSI
27=Sensor type 0 TO 100 PSI
28=Sensor type 0 TO 150 PSI
29=Sensor type LG-Ni 1000: -50 to 150 °C
P0501(Index I): VSD in "Hand" mode
Max: 4000
P0506[6]: Parameter 7
P0506[7]: Parameter 8
P0506[8]: Parameter 9
Max: 9999.9
P0507[2]: Scalar offset
Max: 65535
P0508[2]: Unit character 3
Max: 65535
P0509[6]: String char 7
P0509[7]: String char 8
P0509[8]: String char 9
Max: 2
2=KTY84
Level 3
Level 3
Level 3
Level 2
Level 3
P0506[9]: Parameter 10
Level 3
Level 3
P0508[3]: Unit character 4
Level 3
P0509[9]: String char 10
P0509[10]: String char 11
P0509[11]: String char 12
Level 3
71 / 100
CM1G5192en
29.07.2010