Hardware Compatibility; Compatibility With Other Cps; Replacement - Siemens SIMATIC NET CP 5614 A2 Operating Instructions Manual

7. Insert the power plug into the socket again and turn your PG/PC on.
The plug and play function of Windows automatically searches for a driver.
8. Follow the instructions of the Hardware Wizard of Windows.
Do not activate the search for drivers on the Internet.
4.3

Hardware compatibility

4.3.1

Compatibility with other CPs

Compatibility with other communications processors
The communications processors CP 5613 A2 and CP 5614 A2 can replace the following
communications processors:
● CP 5613
● CP 5614
4.3.2

Replacement

Note
If the previous CP has been removed from the PG/PC, no configuration changes need to be
made
You can adopt the configuration of the previous CP. To do this, you simply need to reload
the configuration.
Note the following: When loading the previous configuration, the previous CP has priority
over the new CP. As long as the previous CP is connected, its configuration cannot be
adopted by the new CP. You should therefore remove the previous CP from your PC/PG.
Procedure for replacement
When replacing a module, follow the steps described in the section "Hardware installation
(Page 17)".
CP 5613 A2/CP 5614 A2
Operating Instructions, 08/2016, C79000-G8976-C301-02
Hardware installation
4.3 Hardware compatibility
19