Name Of Each Part; System Configuration; Names And Functions Of The Pc7501 Upper Panel Leds - Renesas M3062PT-EPB User Manual

2.3 Name of Each Part

2.3.1 System Configuration

Figure 2.1 shows a configuration of the PC7501 system.
Figure 2.1 System configuration
(1) Emulation probe M3062PT-EPB
(2) Converter board M30800T-PTC

2.3.2 Names and Functions of the PC7501 Upper Panel LEDs

Figure 2.2 shows the names of the LEDs on the upper panel of the PC7501.
Figure 2.2 Names of the LEDs on the upper panel of the PC7501
Emulator debugger
M3T-PD30F
Host machine
LPT parallel, USB or LAN interface
This emulation probe consists of the interface board PCA7501EPBA for the M16C Series and
MCU board M3062PT-EPBM for the M16C/62P. The M3062PT-EPBM with an evaluation
MCU is separately available for replacement.
This is a converter board for connecting to 100-pin 0.65-mm-pitch LCC socket IC61-1004-051
on the target system. For details, refer to "3.6 Connecting the Target System" (page 34).
System status LEDs
(1) Emulation probe
Emulator PC7501
Target system
Target status LEDs
( 21 / 80 )
M3062PT-EPB
(2) Converter board
M30800T-PTC