Names And Functions Of The Pc4701 Front Panel Leds - Renesas Single-Chip Microcomputer M306NKT3 User Manual

M306NKT3-RPD-E User's Manual

1.3.2 Names and Functions of the PC4701 Front Panel LEDs

Figure 1.2 shows the names of the LEDs on the front panel of the emulator.
Figure 1.2 Names of the LEDs on the front panel of the PC4701
(1) System Status LEDs
The system status LEDs indicate the emulator PC4701's power supply, firmware operating status, etc. Table 1.3 lists the
definition of each system status LED.
Table 1.3 Definitions of the system status LEDs
Name Status
POWER
SAFE Flashing
ERROR
Flashing
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
System status LEDs
PERFORMANCE
ON Emulator system power supply is turned ON.
OFF Emulator system power supply is turned OFF.
ON Emulator system is operating normally.
Special mode (maintenance mode) for downloading firmware. The
emulator system does not operate except for downloading firmware and
the self-check.
OFF Emulator system is not operating normally.
ON Emulator system is not operating normally (system status error).
Downloading firmware.
OFF Emulator system is operating normally.
STATUS OF
TARGET
POWER POWER
SAFE CLOCK
ERROR RESET
STATUS OF
RUN
SYSTEM
HALT
RESET
HIGH
EMULATOR
Meaning
Target status LEDs
Page 16 of 104
1. Outline