Connecting 100-240 Vac Power Source To Equipment Cabinet; Figure 41: 100-240 Vac Connections On The Expansion Cabinet Junction Panel; Figure 42: Ac Socket (Iec Connector) - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6802800U74-AN
Chapter 4: Hardware Installation
Figure 41: 100–240 VAC Connections on the Expansion Cabinet Junction Panel
4.5.3.4
Connecting 100–240 VAC Power Source to Equipment Cabinet
WARNING: Make sure all power to the Power Supply Unit is switched off to prevent accidental
contact with high energy and injury to personnel.
Procedure:
1 Connect the AC cable to the AC socket (type IEC C15 line socket, Motorola P/N 3166502A01),
which is provided with the MTS.
2 Insert the AC socket into the AC input connector on the MTS and fix with the retaining clip as
shown in Figure 42: AC Socket (IEC Connector) on page
supplied IEC connector.

Figure 42: AC Socket (IEC Connector)

10
6
106. This fixture will only work with the