Motorola MTS LiTE Installation, Configuration And Basic Service Manual page 207

Cable
In-
Part
dex
Number
bers on
page 188.
18 3066543B ATCC (3, 4)
16
19 3066543B RX Splitter 1 /
11 Prime Cab
20 3066543B RX Splitter 2 /
11 Prime Cab
21 3066543B RX Splitter 3 /
11 Prime Cab
NOTICE:
In the Prime Cabinet, the cables from ATCC 1/TX OUT to Duplexer 1/TX and from ATCC 2/TX
to Duplexer 2/TX needs to be combined with a T Cable and connected to Duplexer 1/TX,
allowing Expansion Cabinet channels to be connected to Duplexer 2/TX.
When MTCC is used instead of ATCC, connect the cables to corresponding inputs and outputs.
RX cables from Filters in Prime Cabinet to RX Splitters in the Expansion Cabinet are routed
through holes on the back side of the top-lid.
From Unit To Unit
Duplexer 2 /
TX in Prime
Cabinet
Duplexer 1/
Exp Cab (in
MTS 4 Prime
Cabinet)
Duplexer 2 /
Exp Cab (in
MTS 4 Prime
Cabinet)
Preselector /
Exp Cab (in
MTS 4 Prime
Cabinet)
Chapter 5: Interconnection and Internal Cabling
Notes
TX path, Duplexer TX cable rout-
ed through conjunction hole at
side of the cabinet
RX path/ RX on 1 or 2 ant.
RX path/ RX on 1 or 2 ant.
RX path/ RX on 2 ant.
6802800U74-AN
203