Remote Gps Receiver Placement Requirements; Figure 65: Remote Gps Receiver Connection On Mts Lite Junction Panel; Figure 66: Remote Gps Receiver Connection On Mts 2 Junction Panel; Figure 67: Remote Gps Receiver Connection On Mts 4 Junction Panel - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6802800U74-AN
Chapter 4: Hardware Installation

Figure 65: Remote GPS Receiver Connection on MTS LiTE Junction Panel

Figure 66: Remote GPS Receiver Connection on MTS 2 Junction Panel

Remote GPS Connector
Remote GPS Connectors

Figure 67: Remote GPS Receiver Connection on MTS 4 Junction Panel

4.8.4.1

Remote GPS Receiver Placement Requirements

Mount the GPS antenna below the tallest point on the tower, pole, or roof of the MTS site.
For systems in the northern hemisphere, mount the GPS antenna to maintain a clear view of the
southern sky. For systems in the southern hemisphere, mount the GPS antenna to maintain a clear
view of the northern sky.
The recommendation is to maintain a view to the entire sky (10º above the horizon in all directions
without any obstructions).
Isolate the remote GPS receiver from RF interference by mounting the antenna at least 3.7 m (12 in.)
horizontally from other transmitting antennas. For mounting and physical installation, see instructions
enclosed with the external GPS receiver head.
12
6