Can Bus Cabling - Mts 2; Table 68: Can Bus Cabling For Mts 2 With Tx/Rx On 1 Ant. Rx On 2 Ant - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6802800U74-AN
Chapter 5: Interconnection and Internal Cabling
5.6.2
CAN Bus Cabling – MTS 2
The Site Controller contains the internal termination in one end of the CAN Bus, and the last Duplexer
in the CAN Bus has a terminator in one connector.
NOTICE: CAN Bus cabling depends on filter configuration.

Table 68: CAN Bus Cabling for MTS 2 with TX/RX on 1 ant. RX on 2 ant.

In- Cable Part
dex Number
MTS 2 (TX/RX on 1 ant. RX on 2 ant.)
1 3066575B01
2 3066544B10
3 0966513A01
212
From Unit / Connection
Name
Site Controller/ CAN
Power Supply Unit/
CAN2
Duplexer/ CAN2
To Unit / Connection
Name
Power Supply Unit/
CAN1
Duplexer/ CAN1
CAN Bus termination
Notes
Red cable
Red cable