Base Radio Startup Sequence; Table 77: Base Radio Leds: Normal Startup Sequence; Table 78: Base Radio Leds: Hardware Failure - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6.5.1

Base Radio Startup Sequence

Verify the following LED conditions on the base radio controller according to the following table.

Table 77: Base Radio LEDs: Normal Startup Sequence

Status Tx
(Trans-
mit)
off off
off off
Amber off
Green off
Green off
Green Green

Table 78: Base Radio LEDs: Hardware Failure

Sta- Tx Alar
tus (Trans- m
mit)
off off off
off off Red
Am- off Red
ber
Gree off Red
n
Alar Description
m
off No power / initial
LED test (flashing multicolor)
Red Booting
Red Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
Red BRC main application is running
off No active alarms
off BR is keyed
Description
No power / initial
LED test (flashing multicolor)
Booting
Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
BRC main application is running but an alarm is preventing
the BRC from keying
6802800U74-AN
Chapter 6: Configuration and Testing
235