Table 125: Receiver Specifications - Teds - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6802800U74-AN
Chapter 14: Technical Specifications
Receiver Specification
population mean:
spec limit:
Sensitivity (normal conditions, faded, TU50, 4% BER):
population mean :
spec limit:
Degradation (extreme conditions, static and faded)
Nominal Error Rate (unprotected T1):
Static, -85 to -40 dBm:
Static -40 to -20 dBm:
TU50, -84 to -40 dBm:
Maximum On-channel Desired Power Level
Co-channel Interference (19 dB C/I, faded, unprotected T1): TU50
Adjacent Channel Interference (faded, unprotected T1, normal condi-
tions, 45 dB C/I (40 dB C/I for 800 MHz), at -103 dBm): TU50
Adjacent Channel Interference (faded, unprotected T1, extreme condi-
tions, 35 dB C/I (30 dB C/I for 800 MHz)), at -97 dBm): TU50
Blocking (static, normal conditions, 4% BER):
50 - 100 kHz
100 - 200 kHz
200 - 500 kHz
>500 kHz
Spurious Responses (normal conditions)
1st Image
1/2 IF
2nd Image
1/2 2nd IF
Intermodulation Response Rejection: Normal conditions
Table 125: Receiver Specifications – TEDS
Receiver Specification
Degradation (extreme conditions, static and faded)
Maximum On-channel Desired Power Level
Co-channel Interference (19dB C/I, faded, 16QAM, rate=1/2) TU50:
Adjacent Channel Interference (static, 64QAM, 50kHz, 30dB C/I at
-97dBm, rate = 1/1) Applicable for both normal and extreme conditions.
Blocking 25kHz TEDS (static, normal conditions, 3% BER):
406
Value or Range
-120.0 dBm(-119.5
dBm 800 MHz)
-117.5 dBm
-113.5 dBm(-113.5
dBm 800 MHz)
-111.0 dBm
3 dB
0.01%
0.1%
0.4%
-20 dBm
2.0%
2.0%
2.0%
-40 dBm
-35 dBm
-30 dBm
-25 dBm
6 max.
70 dB
70 dB
70 dB
70 dB
65 dB
Value or Range
3 dB
-30 dBm
10.0%
3.0%