6802800U74-AN
Chapter 3: Site Preparation
Figure 6: Suggested MTS LiTE Site Layout
3.2.2
MTS 2 Cabinet Considerations
The equipment cabinet dimensions are: 443 mm (width)/472 mm (depth)/605 mm (height) as shown in
the following figure.
Figure 7: MTS 2 Cabinet Dimensions
The equipment cabinet may be installed against adjacent equipment, however the following minimal
distances must be retained:
•
45 mm on both sides of the cabinet
•
800 mm of free space in front of the cabinet
The cabinet front door is removable.
cabinet layout within a suggested site. Additional free space is recommended at the front of the cabinet
to allow the service personnel to access the equipment easily.
18
Service Area
MTS
rack
rack
LiTE
minimum 45mm
Figure 8: Suggested MTS 2 Site Layout on page 66
minimum
600mm
minimum
800mm
427mm
shows the