Configuration; Additional Base Radio For Existing Module Cage In Mts 4 - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

15.2.2

Configuration

No configuration in itself is needed for the module cage, but the Power Supply Unit needs to be
configured and this is described in
Installation and configuration of additional Base Radios are described separately in
Radio for Existing Module Cage in MTS 4 on page
Furthermore, if an additional Site Controller is ordered as a separate expansion kit, it needs to be
installed and configured, see
15.3

Additional Base Radio for Existing Module Cage in MTS 4

It is possible to add a Base Radio into an existing module cage of the MTS 4.
NOTICE: The additional Base Radio is delivered with the expansion kit that includes required
equipment and cables.
Updating the Mapping List with the New PSU TrackID on page
423.
Redundant Site Controller on page
6802800U74-AN
Chapter 15: Expansion Options
Additional Base
431.
337.
423