Receiver Specifications; Table 124: Receiver Specifications - Tetra - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

Transmitter Specification
Transmitter Power Control
Transmitter Modulation Accuracy
Synchronization
Adjacent-channel power (25kHz)
Adjacent-channel power (50kHz)
Adjacent-channel Power due to Switching
Tx Conducted Emission (25kHz TEDS)
Tx Conducted Emission (50kHz TEDS)
Intermodulation Attenuation
RF Input Impedance
14.3.5

Receiver Specifications

The receiver specifications are listed in
Table 125: Receiver Specifications – TEDS on page
All specifications listed in the following two tables are through the RF Distribution System, unless
otherwise stated.
Table 124: Receiver Specifications – TETRA
Receiver Specification
Sensitivity (normal conditions, unprotected T1, static, 4% BER):
Value or Range
12 dB
10% RMS/Burst
1/4 symbol
Offset
25
50
75
Offset
37.5
62.5
87.5
-45 dBc
100 - 250 kHz
250 - 500 kHz
500 - 2500 kHz
2500 - frb kHz
>frb
112.5 - 262.5 kHz
262.5 - 500 kHz
500 - frb kHz
>frb
70 dB
50 (nom.)
Table 124: Receiver Specifications – TETRA on page 405
406.
6802800U74-AN
Chapter 14: Technical Specifications
NOTICE: Base Radio Power
Limits above are also applicable
for 800 MHz.
Limit
-55
-65
-67
Limit
-55
-63
-65
-70 dBc
-80 dBc
-80 dBc
-90 dBc
-95 dBc
-70 dBc
-75 dBc
-80 dBc
-95 dBc
Value or Range
and
405