Recommended Test Equipment; Table 29: Recommended Installation Test Equipment - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

6802800U74-AN
Chapter 4: Hardware Installation
4.13.2

Recommended Test Equipment

The following table lists the test equipment recommended for installation. Procure the following
equipment locally as it is not part of the MTS shipment. All model numbers are Motorola Solutions part
numbers unless noted otherwise.

Table 29: Recommended Installation Test Equipment

Test Equipment
Digital Multimeter (only
1 required)
Time Domain Reflec-
tometer (TDR)
Ground Resistance
Ohmmeter
Service Computer
Service Connector Box
Basic Service Cable
(RS232)
TETRA Signal Genera-
tor
TETRA Analyzer
RF Attenuator, 250 W,
40 dB
RF Attenuator, 10 dB
RF Adapter
RF Adapter
RF Adapter
14
2
Model/Type
Fluke 77
AEMC 3700 clamp-on
ground tester
p/n: 0166502N05
p/n: 3066565B01
Rhode & Schwarz:
SMU200A + SMU-K68
Rhode & Schwarz:
FSQ + FS-K110 +
FSQ-K70
Weinschel 404043
minimum 100 W
33 QMA-N-50-1/133
NE
31 N-QMA-50-1/1- -NE
33_716-N-50-1/- -_UE
Supplier Description
Fluke AC/DC measurements.
Equivalent instrument is
acceptable
Locally Pro- Possibly needed by Field
cured Installation Team
Locally Pro- Possibly needed by Field
cured Installation Team
Locally Pro- Local service terminal
cured
Motorola Solu- Used for measuring receiv-
tions er sensitivity
Motorola Solu- For pinout information, see
tions Site Controller – Front Pan-
el Connectors on page 301
Rhode & Used for checking receive
Schwarz and transmit operation
Used for checking receive
and transmit operation
Protection for HP89441A
Motorola Solu- Protection for HP89441A
tions
Huber & Suh- N female to QMA male
ner
Huber & Suh- N female to QMA female
ner
Huber & Suh- N female to DIN 7-16 male
ner