Table of Contents
Advertisement
Recommended Tools and Equipment
Equipment Unpacking and Inspection
Note
Cabinet Unpacking
STOP
WARNING
68P81096E37-N
06/28/05
In addition to the typical compliment of hand tools, the following tools and equip-
ment are recommended for proper installation of the station equipment.
•
Tarpaulin or plastic drop cloth or cover surrounding equipment while drilling
concrete anchor holes (for installations where cabinet or rack is being an-
chored to concrete).
•
Vacuum cleaner for removing concrete dust caused by drilling.
The station equipment may be shipped by either air freight or electronic van (as
specified by customer), except where noted.
•
If no cabinet or rack is desired, the station is shipped in a box; the station is
positioned between pieces of cushioned corrugated cardboard.
•
All available cabinets are shipped with the station(s) installed in the cabinet,
with the cabinet bolted to a wooden skid and covered with a cardboard box
with corrugated interior corner braces.
•
Stations to be used in open frame racks are shipped with the station and an-
cillary equipment mounted in the rack and covered by an antistatic plastic
bag. All rack shipments are electronic van only.
Thoroughly inspect the equipment as soon as possible after delivery. If any part
of the equipment has been damaged in transit, immediately report the extent of the
damage to the transportation company and to Motorola.
Antistatic plastic bags should be kept for future shipping/transporting of station.
When a station (mounted in a cabinet) is delivered from Motorola, it arrives in
suitable packing materials. If the unpacked equipment is damaged, return it
to Motorola in its original packaging.
Equipment should be handled in its original packaging until it is delivered to
its final destination. If the equipment is damaged while being moved without
the original packaging, the warranty claim is not valid.
Installation
11
Hide quick links:
Advertisement
Chapters
Table of Contents
