Important parameters
10.6
Switching input tab
Figure 10.8: Switching input tab
Inverted
Release
Debounce time
Switch-on delay
Pulse duration
Switch-off delay
NOTE
If the switch-off delay is activated, the parameter "pulse duration" should be "0".
Function
ATTENTION!
Depending on wiring, either a switching input or a switching output is available on the
BCL 8.
54
Here, the input level can be inverted
Switching input enabled or disabled
This time period must lapse until the trigger signal is regarded as
valid.
The trigger signal is passed on delayed by the specified time period.
If the value is higher than "0": duration of the activation, regardless of
how long the trigger signal has been present.
After the end of the trigger signal, the pulse is extended internally by
this time period.
Event that is started when the switching input is activated.
BCL 8
Leuze electronic