Operation
8
Operation
ATTENTION, LASER RADIATION – CLASS 2 LASER PRODUCT
Follow the safety notices in Chapter 2.5 on Page 7!
NOTE
Please observe the notices for device arrangement in Chapter 6.2.1.
If possible, always trigger the laser scanner with the aid of commands, an external sig-
nal transmitter (photoelectric sensor) or the integrated AutoReflAct function. Only then
can you be certain whether a code has been read. If read, the code contents are trans-
mitted; if not, the NoRead character is transmitted at the end of the reading gate).
8.1
Display elements
On the BCL 8, you will find two LEDs that show the operational readiness and the reading
state of the bar code reader (see Table 4.2 on page 14).
42
BCL 8
Leuze electronic