Pin Assignment; Pwr / Sw In/Out (Power And Switching Input/Output) - Leuze electronic BPS 307i Operating Instructions Manual

NOTICE
No integrated parameter memory!
 No parameter memory is integrated in connection hood KB 307.
 Remove the system plug (JST) at the end of the cable.
 Connect the connection cable to your SSI interface.
7.5

Pin assignment

7.5.1

PWR / SW IN/OUT (Power and switching input/output)

5-pin, M12 plug (A-coded) or terminal block for connecting to PWR / SW IN/OUT.
Figure 7.4: PWR / SW IN/OUT connection
Table 7.1:
Pin/terminal
1
2
3
4
5
Thread (M12 plug)
Cable gland
Connection cables: see table 14.3
CAUTION
UL applications!
 For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National
Electric Code).
Leuze electronic
5
2
1
FE
3
4
PWR / SW IN/OUT pin assignment
Designation
VIN
SWIO1
GNDIN
SWIO2
FE
Functional earth
4
2
1
3
5
Assignment
+18 ... +30 VDC supply voltage
Sw. input/output 1 (configurable)
Negative supply voltage (0 VDC)
Sw. input/output 2 (configurable)
Functional earth
Connection cable shield.
The shield of the connection cable is on the thread of
the M12 plug or on the screw fitting of the cable bush-
ing.
The thread or the screw fitting is part of the metallic
housing. The housing is at the potential of the func-
tional earth via pin 5.
BPS 307i
Electrical connection
46