Cable Lengths; Disassembling, Packing, Disposing - Leuze electronic BCL 8 Series Original Operating Instructions

Bar code reader with integrated decoder
Hide thumbs Also See for BCL 8 Series:
Table of Contents

Advertisement

Installation
6.3.3

Cable lengths

The following maximum line lengths to be used must be observed:
Connection
BCL 8 direct
BCL 8 – MA 8.1
BCL 8 – MA 8-01
MA 8.1 – host
MA 8-01 – host
Switching input/output
Table 6.2:
NOTE
The RS 232 connection between BCL 8 and host must not exceed a total of 10m.
6.4

Disassembling, packing, disposing

Repacking
For later re-use, the device is to be packed so that it is protected against shocks and
humidity. Optimum protection is achieved when using the original packaging.
NOTE
Electrical scrap is a special waste product!
 Observe the locally applicable regulations regarding disposal of the product.
38
Interface
RS 232
RS 232
RS 232
RS 232
RS 485
Cable lengths
Max. cable length
< 3m
< 3m
< 3m
< 10m
< 25m
< 10m
BCL 8
Shielding
required
required
required
required
required
Not necessary
Leuze electronic

Advertisement

Table of Contents
loading

Table of Contents