Table of Contents
Advertisement
2.2 Displays in the Viewfinder
In addition to the LED indicators on the viewfinder, markers and characters are also displayed on the viewfinder screen. Details are
provided below.
LED Indicator
- G TALLY : G TALLY indicator (Green).
- BATTERY : Lights when the battery voltage has fallen below the set
value.
- !
: Lights when the camera settings are not standard. (See
Note.)
- R TALLY : R TALLY indicator (Red).
- EXT
: Lights while the lens extender is being used.
Note:
The ! indicator lights when the following settings are mode.
Switch/Function
AWB SELECT switch
OFF
KNEE MODE
MANUAL
SKIN DTL
ON
SHUTTER
ON
A. IRIS CORR
Other than OFF
Center Marker, Safety Marker, Frame Marker
- The Center Marker is used to ascertain the center of the screen or align
the camera horizontally and vertically.
- The Safety Markers are used to check the action safety area or title
safety area. Switching between the action area and the title area is made
from the menu.
- The Frame Marker is used to ascertain the frame of the image being
shot.
- Aspect ratio (4:3/13:9/14:9/16:9) can be set to the Safety Markers and
Frame Marker separately.
Reference:
See "5. CAMERA SETTINGS and ADJUSTMENT [Menu
Configuration and content]" for how to set each marker.
Zebra Indicator
The zebra signals are striped patterns that appear superimposed on the
actual picture. There are two zebra signals: the zebra 1 signal which
appears in the area where the video level of the subject is higher than the
set value, and the zebra 2 signal which appears only in the area where the
video level is the same as the set value. The zebra indicator is turned ON
or OFF using the ZEBRA switch on the front of the viewfinder.
Reference:
See "5. CAMERA SETTINGS and ADJUSTMENT [Menu
Configuration and content]" for how to set the zebra signal.
Setting Status
HDK-65C 1501 VER1 (U)
2.2 Displays in the Viewfinder
G TALLY
R TALLY
BATT
!
EXT
BATT
!
EXT
Title area
BATT
!
EXT
2
Center marker
Action area
Frame marker
27
Advertisement
Table of Contents
