Environmental Control System Warnings And Cautions - Molecular Devices ImageXpress Pico Installation Manual

Automated cell imaging system with cellreporterxpress software version 2.7
Hide thumbs Also See for ImageXpress Pico:
Table of Contents

Advertisement

ImageXpress Pico Automated Cell Imaging System Installation Guide

Environmental Control System Warnings and Cautions

Take note of the following when using the environmental control system:
WARNING!
WARNING! BIOHAZARD.
the instrument before you return parts to Molecular Devices for repair. Molecular
Devices does not accept items that have not been decontaminated where it is
applicable to do so. If parts are returned, they must be enclosed in a sealed plastic bag
stating that the contents are safe to handle and are not contaminated.
CAUTION!
See
Using the Environmental Control System on page 54
important information on using the environmental control system.
50
Do not operate the environmental control system with substances, or under
conditions, which can cause a risk of explosion, implosion, or the release of gases.
Use a compressed gas supply in a well-ventilated area. The instrument is not air-
tight. Gas can escape into the atmosphere surrounding the instrument. When you
use potentially toxic gas, observe the cautionary procedures your safety officer
defines to maintain a safe work environment, such as the use of an automatic
warning system.
Use only the compressed gas supplies described in this guide, which are CO
and compressed air. Do not attempt to connect a pure O
supply to the instrument.
The environmental control system includes heated tubing that controls the
temperature of the gas flow. Some accessible parts of the tubing and the
humidifying column can reach temperatures of up to 50°C (122°F). Avoid touching
the temperature-controlled parts of the system.
Do not use the instrument with hazardous substances.
If you use any substances or materials that pose a risk of infections with the
instrument, it is your responsibility to apply best practices when handling these
materials.
If the CO
port or the N
2
2
(included) to close it off.
It is your responsibility to decontaminate components of
port is not connected to a gas cylinder, use a blind plug
for details on other cautions and
, N
2
tank or any other gas
2
5063666 K
,
2

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ImageXpress Pico and is the answer not in the manual?

Table of Contents