Chemical And Biological Safety - Molecular Devices ImageXpress Pico Installation Manual

ImageXpress Pico Automated Cell Imaging System Installation Guide

Chemical and Biological Safety

Normal operation of the instrument can involve the use of materials that are toxic, flammable,
or otherwise biologically harmful. When using such materials, observe the following
precautions:
Handle infectious samples based on good laboratory procedures and methods to prevent
the spread of disease.
Observe all cautionary information printed on the original containers of solutions before
their use.
Dispose of all waste solutions based on the waste disposal procedures of your facility.
Operate the instrument in accordance with the instructions outlined in this guide, and take
all the required precautions when using pathological, toxic, or radioactive materials.
Splashing of liquids can occur. When working with potentially hazardous liquids, take
applicable safety precautions, such as wearing safety glasses and protective clothing.
Observe the applicable cautionary procedures as defined by your safety officer when
using hazardous materials.
Use a compressed gas supply in a well-ventilated area. The instrument is not air-tight. Gas
can escape into the atmosphere surrounding the instrument. When you use potentially
toxic gas, observe the cautionary procedures your safety officer defines to maintain a safe
work environment, such as the use of an automatic warning system.
Observe the applicable cautionary procedures as defined by your safety officer when
using flammable solvents in or near an instrument that is powered on.
Observe the applicable cautionary procedures as defined by your safety officer when
using toxic, pathological, or radioactive materials.
WARNING!
liquids or gases are present.
12
Never use the instrument in an environment where potentially damaging
5063666 K