Chapter 3: Installing The Cellreporterxpress Software - Molecular Devices ImageXpress Pico Installation Manual

Automated cell imaging system with cellreporterxpress software version 2.7

Hide thumbs Also See for ImageXpress Pico:

Table of Contents

Chapter 3: Installing the CellReporterXpress Software

The CellReporterXpress software is the user interface for the ImageXpress Pico system. You

will use the software to work with the ImageXpress Pico system and control its functions.

After you set up the ImageXpress Pico system as described in the previous section, you are

ready to install the CellReporterXpress software. See the CellReporterXpress Installation

Guide for details.

Note: If you purchased the optional workstation and monitor bundle, the

CellReporterXpress software is already installed on the host computer. You may still

need to install the software on any remote analysis and remote storage computers. You

may also want to set up workstation clients.

If you did not purchase the optional workstation and monitor bundle, you must install the

software on a host computer that you provide.

After you install the CellReporterXpress software, return to this guide to finish setting up the

ImageXpress Pico system.

5063666 K

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ImageXpress Pico and is the answer not in the manual?