Molecular Devices ImageXpress Pico Installation Manual page 82

ImageXpress Pico Automated Cell Imaging System Installation Guide
5. Press the Power button on the front of the instrument.
When the status light on the Power button is amber, the instrument is fully powered off.
6. Disconnect the power cord and the Ethernet cable(s).
7. With the instrument off and all cables disconnected, manually move the sample stage to
the center of the opening.
8. If needed, remove the labware holder or the environmental control cassette from the
sample stage and pack it in its original packaging.
82
Note: If the ImageXpress Pico system doesn't respond, you can perform a hard
shutdown by holding the Power button for five seconds.
5063666 K