Aastra OpenCom 100 Series Mounting And Commissioning User Manual page 89

The manual activation of the remote configuration activates the DTMF evaluation for
the next voice call. You can add additional phone numbers for remote configuration
on the configurator's Telephony: Extended: Remote service menu page. Activate the
IP option for the desired phone numbers.
Note
You also need to activate the desired type of connection directly on the Telephony:
Extended: Remote service.
Manual Activation
The following code number procedures activate or de-activate the remote configu-
ration access. These code digits can be entered on any standard terminal or system
telephone.
Remote Configuration On (Log-on with Administrator Password)
H * 1 9 * Z
Remote Configuration On (Log-on with Temporary Password)
H * 1 9 * Z
Remote Configuration Off
H # 1 9 #
Please note:
The customer service centre/authorised dealer can log into the OpenCom 100 com-
munications system as an administrator:
• User name: "Administrator"
• Password: [administrator password]
Note
If you do not wish to let the customer service centre/authorised dealer know the ad-
ministrator password, you can define a temporary password for remote configuration
with at least five digits.
#
(system PIN)
* Z
(system PIN) (temporary password)
The system PIN is preset to "0000" and it is absolutely impera-
tive that the system administrator changes it to prevent undesir-
able remote maintenance.
Configuration
#
87