®
DECT over IP
DECT over IP/OpenMobility Manager: WLAN Profiles
Use the following settings for standard operations.
General Settings
•
Select the desired WLAN Profile and activate the Profile Active option.
•
Enter a SSID (Service Set Identifier, wireless network identification) to identify a
network. This network identification is transmitted at regular intervals, making it
easier to find the networks you're looking for, using the "View available wireless
networks" function in Windows XP, for example.
•
For standard operation you should leave the following settings at their default
values: VLAN Tag at 0 (Off ), Beacon Period at 100 ms, DTIM Period at 5, RTS
Threshold at 2347 (Off ), Fragmentation Threshold at 2346 (Off ), Maximum
Bitrate at 54 Mbit/s, 802.11b/g Mode at "Mixed" and Interference Avoidance on
"Off".
Tip:
•
You can prevent the transmission of wireless network identification (SSID) with the
Hidden SSID Mode setting. This will however make network identification dif-
ficult and does not generally increase data security, so it is preferable to leave this
on the default setting of "Off".
148
If you are using only modern WLAN cards with 802.11g, you can
further speed up data transfer by configuring the setting
802.11b/g Mode to "802.11g only".
Need help?
Do you have a question about the OpenCom 100 Series and is the answer not in the manual?