Internal/External S; Ports; U Pn Ports - Aastra OpenCom 100 Series Mounting And Commissioning User Manual

Hide thumbs Also See for OpenCom 100 Series:
Table of Contents

Advertisement

Internal/External S

All S
ports can be operated externally, i.e. on an ISDN network termination unit. The
0
S
2 port of an OpenCom 130 and an OpenCom 131 can also be connected internally.
0
S
ports on interface cards (available for an OpenCom 130 and OpenCom 150) can
0
also be switched external/internal. It is not possible to use both assignments simulta-
neously.
Up to eight devices per bus (ISDN telephones, ISDN fax machines, ISDN base stations,
ISDN cordless telephones, ISDN adapters for the PC among others) can be connected
to the internal S
ports by twin-pair cables. The power for three of these devices can
0
be supplied by the bus; if more devices are used, they then require their own power
supplies. The internal S
tocol (Euro-ISDN).
U

Ports

pn
A system terminal can be connected to every U
The Aastra 6771 / 6773 / 6775 (OpenPhone 71 / 73 / 75) and the OpenPhone 61 / 63 /
65 are cord-bound system terminals. The OpenPhones 63 and 65 can be cascaded on
a U
adapter so that you can operate two OpenPhones on one U
pn
details, refer to the "OpenPhone 61, 63, 65" user guide).
The RFP 22 / 24 base station is required for the use of cordless system telephones (e.g.
OpenPhone 2x, Aastra 142d or Aastra 610d / 620d /630d).
Note
You can only operate DECT base stations on the ports of U
cards are available for an OpenCom 130 and an OpenCom 150.
If this base station is connected to a U
calls are possible with the handsets. If the base station is connected to two U
eight simultaneous calls are possible. However, note that only as many external con-
nections are possible as there are externally connected B-channels available.
If you use a cordless handset such as the Aastra 610d / 620d /630d, this can also be
contacted by other base stations using the GAP/CAP standard.
Ports
0
buses enable point-to-multi-point calls as per the DSS1 pro-
0
port of an interface card, four simultaneous
pn
port by a twin-wire cable.
pn
pn
interface cards. These
pn
Installation
port (for further
ports,
pn
59

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OpenCom 100 Series and is the answer not in the manual?

This manual is also suitable for:

Opencom 130Opencom 131Opencom 150

Table of Contents