Aastra OpenCom 100 Series Mounting And Commissioning User Manual page 130

Hide thumbs Also See for OpenCom 100 Series:

Table of Contents

Voice over IP (VoIP)

Connect the Aastra 673xi/675xi to your network and plug in the power supply.

Details about this can be found in the installation manual which is provided with

the Aastra 673xi/675xi.

If the Aastra 673xi/675xi has the factory default configuration, it will request an IP

address configuration from the DHCP server of the OpenCom 100 communications

system. The IP address and the location for loading files from the TFTP server of the

OpenCom 100 is received as a part of the DHCP answer.

Now the Aastra 673xi/675xi reads in the configuration files from the TFTP server. This

includes a generic configuration file ("aastra.tuz") and a device specific configuration

file for the given MAC address. During this process the OpenCom 100 communica-

tions system transfers all settings and by this it configures the system telephony fea-

tures for the Aastra 673xi/675xi. If necessary, The firmware stored in the Aastra 673xi/

675xi as well as the diverse language modules are updated also.

Note

The configuration files are sent using an encrypted format (file extension: *.tuz).

Details about the boot procedure, how to program extensions ("XML keys") and about

the manual DHCP-/TFTP configuration can be found in the english manual "IP Phone

Admin Guide", which you can download from the Aastra web site.

Aastra 673xi/675xi Setup

You can change the configuration and function key settings for each Aastra 673xi/

675xi individually:

Call up the Telephony: Devices: System phones menu page in the Configurator.

In the Devices list, select the desired Aastra 673xi/675xi.

The menu page shows the current configuration, the function key assignment and

a device graphic.

Click on the Change button to determine general settings, e.g. the display lan-

guage. Confirm the setting on the following page with Apply.

Depending on the terminal type, different lists with function keys will be shown:

– Programkeys: You can label this function keys on the device using a paper strip.

128

Table of Contents

Show Quick Links

Table of Contents

Opencom 130 Opencom 131 Opencom 150