Scope Of Delivery - Aastra OpenCom 100 Series Mounting And Commissioning User Manual

Mounting the OpenCom 150 Rack InfoCom System
Label
SUBSCRIBER 1..8
(Slot 4 & 5)
AT 1..4 (Slot 3, 4 & 5)
An overview of the interface cards can be found under the heading OpenCom 150 (5
Slots) starting on page 50.
For each of the five slots, there is a LED on the front panel of the OpenCom 150 Rack.
These LEDs are labelled SLOT1..SLOT5. An LED will show a constant light, if an
interface card is inserted into the corresponding slot and the operating software has
detected an interface card. An LED will blink, if an error condition was detected.

Scope of Delivery

• One communications system OpenCom 150 Rack
• One AC adapter with connection cable
• One set of short user guides
• One CD
Note
Note for the Aastra installer: Please download and install the latest released software
from our Web site/partnership area.
78
Interface Card
4 x a/b
8 x a/b
M100-AT4
Ports
a/b1 ... a/b4
a/b1 ... a/b8
a/b1 ... a/b4