Configuring "Aastra Mobile Client" Software - Aastra OpenCom 100 Series Mounting And Commissioning User Manual

Tip:

Configuring "Aastra Mobile Client" Software

System telephony features (e. g. enquiry, forwarding) can be conveniently used on the
mobile telephone (FMC telephone) when you install the "Aastra Mobile Client"
software on the device. Comparable to a system terminal, this makes many features
available on the mobile telephone via a separate menu. The "Aastra Mobile Client"
software runs under Symbian, a widespread operating system for mobile telephones.
Specific models by the manufacturers LG, Nokia, RIM and Samsung are supported.
Please contact your retailer if you have questions or if you desire further information
on the supported devices.
You manage the installation, settings and licensing of the "Aastra Mobile Client"
software on an internet-based configuration platform:
1. Open a Web browser and call the internet address provided in the licence confir-
mation.
Logging in to the configuration platform requires the information also provided in
the "Aastra Mobile Client" licence confirmation. You then use a licence key to
activate a specific number of administrator and software licences.
Note
The configuration platform language depends on the language setting of your Web
browser.
2. Create a new entry for each FMC telephone. This entry includes the FMC call
number of the OpenCom 100 communications system and the mobile call
number of the FMC telephone. The following table explains the various settings.
As mobile telephones manage all call numbers in the interna-
tional format, you should also configure the "E.164 dialing" fea-
ture on the OpenCom 100 communications system for the sys-
tem connection used or the SIP line used (see E.164 conversion
starting on page 170).
Fixed Mobile Convergence
191