Configuring The Pc Software; Pc Offline Configuration - Aastra OpenCom 100 Series Mounting And Commissioning User Manual

Configuring the PC Software

Configuring the PC Software
Further possibilities of use can be implemented on a workstation computer with the
Windows operating system by installing drivers and programmes. You can find the
installation programmes required for this on the product CD that comes with the
OpenCom 100.
Proceed as follows to install extra software:
1. Log on under Windows as the administrator.
2. Insert the product CD.
If your PC is suitably configured, the CD will start automatically. Otherwise select
Run from the Start menu. Click on the Browse button to look for the programme
"cd_start.exe" on the CD. Confirm this with Open and OK.
3. Select the required option from the start interface. Follow the programme instruc-
tions.
Further instructions for various options that are available are given below.

PC Offline Configuration

The offline configurator is a reduced system software. With the offline configurator it
is possible to create system configurations for various TC-system types – without a
connection to the live system. You configure a virtual system and later, aided by the
data backup, transfer the configuration to the running system.
Installing the Offline Configurator
1. Display the product CD contents in Windows Explorer. Search the "\OFC\" instal-
lation directory for the offline configurator.
2. Start the StartCenter installation programme by double-clicking on "Setup.exe".
Following the installation assistant's instructions. Select the appropriate instal-
lation directory or apply the default.
3. On the product CD, in the offline configurator installation directory, you will find
ZIP archives for various TC-system types. Copy the desired ZIP archives to the
installation directory.
216