Dual Operation - Aastra OpenCom 100 Series Mounting And Commissioning User Manual

®
DECT over IP
Configurator: Telephony: Devices: DECT over IP
User administration and set-up of DECT terminals is done in the Configurator of the
OpenCom 100 as well.
The DECT over IP Manager offers a separate web user interface to manage the set-
tings of devices with WLAN functions. Therefore at least one WLAN-RFP has to be con-
figured. If everything is configured correctly, you will see the WLAN Config link. Login
as the user "Administrator" with the currently set administrator's password of the
OpenCom 100.

Dual Operation

Simultaneous operation of base stations via U access and base stations via Ethernet
pn
access is possible with the OpenCom 100. Transparent handovers, for example, are
only possible when between DECT base stations using the same access technology.
When switching over to a DECT base station using different access technology, a DECT
terminal automatically re-establishes a connection (roaming).
Be sure to keep the PARK ID of your OpenCom 100 in mind. The PARK ID is displayed
under System Info: Versions in the Configurator. If the PARK ID starts with 31, there
may be an attempt at a handover between DECT base stations using different access
technology. In this case, make sure that the signal areas of the DECT base stations
using different access technology do not overlap. If the PARK ID starts with a different
value (e. g. 30), prevention of unintentional handovers is effective.
145