Table of Contents
Advertisement
ECAT-2011H EtherCAT Slave I/O module
AD Input Type Selection
The ECAT-2011H provides 8-channel of differential inputs or 16-channel single-ended inputs. The
factory default settings is differentail input. Refer to the following instructions for details of how to
change the Analog Input type.
Figure 3-3.3
In the right-hand window,
click the "CoE – Online" tab.
Double-click the "Index 8000:09 (Analog input type)" to open the "Set Value Dialog" box.
Figure 3-3.5
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
(ECAT-2011H 16S.E./8Diff Ch. Ana.)" itme.
In the left-hand window, click the "Box 1
Figure 3-3.4
- 21 -
Advertisement
Table of Contents
