Table of Contents
Advertisement
ECAT-2011H EtherCAT Slave I/O module
4. Object Description and Parameterization
The CoE interface is used for parameter management of EtherCAT devices. The display matches
that of the CoE objects from the XML device description (ICPDAS ECAT-2011.xml). Once the
ECAT-2011H connected to EtherCAT Master, you can configure the parameters via "CoE – Online"
tab (double-click on the respective object). In general, the changes to the online CoE directory are
immediately effective.
Figure 4-1.1
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
- 24 -
Advertisement
Table of Contents
