Table of Contents
Advertisement
ECAT-2011H EtherCAT Slave I/O module
1.
Introduction
The ECAT-2000 is equipped with the EtherCAT protocol and installed by daisy chain connection
which permits the flexibility in devices installation and reduces infrastructure and operation costs.
All the modules can be deployed in the network topologies such as star, line or ring.
The ECAT-2011H is built in 8-ch differential inputs or 16-ch single-ended analog inputs by software
selectable. It has passed and verified by the conformance test tool, therefore eligible EtherCAT
Master or configurator can manipulate it simply and implement your various applications easily.
Figure 1.1 Typical Application of ECAT-2011H
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
- 3 -
Advertisement
Table of Contents
