Table of Contents
Advertisement
ECAT-2011H EtherCAT Slave I/O module
2. Hardware Information
2.1 Appearance
The front panel and top panel of the ECAT-2011H module contain the I/O connector, LEDs, Ethernet
Port and power connector.
Top Panel
2. EtherCAT Interface
1.
DC Power Input Connector
The "+Vs" and "GND" pins are used for the power supply applies to all types of ECAT-2011H
module. The valid power voltage range is from +10 to +30 V
The definition of "F.G." (Frame Ground): Electronic circuits are constantly vulnerable to
Electrostatic Discharge (ESD), which becomes worse in a continental climate area. ECAT-2011H
module feature a new design for the frame ground, which provides a path that bypasses ESD,
resulting in an enhanced ESD protection capability and ensuring that the module is more reliable.
2.
EtherCAT Interface
ECAT-2011H modules are equipped with two RJ-45 EtherCAT Interface ports. IN is EtherCAT signal
input port that connect EtherCAT Master or EtherCAT signal output of previous EtherCAT slave
module，OUT is EtherCAT signal output that connect the next EtherCAT signal input of EtherCAT
slave module.
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
1. DC Power Input
Connector
.
DC
- 5 -
Advertisement
Table of Contents
