ECAT-2011H EtherCAT Slave I/O module
2.5 Wiring to the Connector
A tip for connection the wire to the connector
Insert the wire
A tip for removing the wire from the connector
Remove the wire
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
Use the blade of a flat-head screwdriver to push
the wire clamp, then hold until step 2 complete.
Use the blade of a flat-head screwdriver to push
the wire clamp, then hold until step 2 complete.
Insulated Terminals Dimensions
Dimensions (Unit: mm)
Item NO.
F
L
CE007512
12.0
18.0
C
W
1.2
2.8
- 11 -