Table of Contents
Advertisement
2.2 Jumper Selection
The following table shows the definition of jumpers. Users need to refer to
this table to configure the I-8124W hardware.
Jumper
Flash Protection. If you need to update
the firmware, you should unlock it
JP1
before you download the firmware. The
default is lock.
SW1
CAN Port 120Ω terminal resistor.
I-8124W DeviceNet Master API functions User's Manual (V 1.6)
Description
Table 2.1
Jumper selections
Status
2021/10/04
20
Advertisement
Table of Contents
