ECAT-2011H EtherCAT Slave I/O module
Figure 3-2.4
Figure 3-2.5
In the left-hand window, ECAT-2011H is now shown in the TwinCAT System Manager.
In the right-hand window, the ECAT-2011H is parameterized via "Process Data" and "CoE-Online"
tabs in the TwinCAT System Manager.
Process Data: The process data-specific settings.
CoE-Online: Settings parameter, refer to
for details.
Figure 3-2.6
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
Click "OK" to start scanning
Click "OK" to activate the free run mode
Chapter 4 "Object Description and Parameterization"
- 17 -