SMART Embedded Computing MVME7100 Programmer's Reference Manual page 72

Programmable Configuration Data
Table A-4
Offset
(HEX)
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
:
1FF
NOTES:
1. This data is not static. Each board must be assigned with an entity unique to the board
assembly number.
2. The method used to program the Product Identifier, Factory Assembly Number, and
Serial Number packets requires that these packets be located in absolute fixed
locations. For this reason, these packets shall have fixed sizes and shall immediately
follow the header.
3. This data is not static. Each board's Serial Number packet must be unique. The board's
serial number is obtained from the onboard serial number label.
70
Static VPD Contents (continued)
Data (HEX) Field Type
00 BINARY
EC
D5 BINARY
51
08 BINARY
01 BINARY
01 BINARY
08 BINARY
08 BINARY
02 BINARY
2D BINARY
xx BINARY
FF BINARY
: :
FF BINARY
MVME7100 Single Board Computer Programmer's Reference (6806800E82C)
Programmable Configuration Data
Description
Vendor Identifier
Device Identifier
Single device width in bits
Number of devices or sockets present
Number of interleave columns
Column width in bits
Minimum write/erase data width in bits
Flash bank number
Flash access speed in nanoseconds: 0x2D = 45 ns
Total bank size [(1<<n)*256K bytes]: 0x0E = 4 GB,
0x0F = 8 GB.
Table A-5
Refer to .
Not Used
:
Not Used