Changing The Settings; Changing The Heating Temperature; Modifying The Comfort Setting (Eco) - DeDietrich MCR 24 User Manual

4. Operating the appliance
4.2

Changing the settings

2x
13
4.2.1.
In summer, it is possible to reduce the heating flow temperature whilst
maintaining comfort. To do this, proceed as follows:
1. Press the D key.
2. Use the [+] and [-] keys to change the parameter value.
3. To confirm the new value, press the key S .
)'

("

T000147-A
4.2.2.
The user can consult or modify the following 3 settings:
4 ON = Activation of the energy-saving setting.
4 OFF = Activation of the comfort setting.
4 AUTO = Setting dependent on the control unit (Factory setting).
1. Press the f key 1 times. The symbol Q flashes.
2. Press the f key a second time. The symbol ECO flashes.
3. To confirm, press the S key.
4. The current operating status is shown on the display:AUTO.
5. Use the + and - keys to change the parameter value.
6. To confirm, press the S key.
Ajj
7. Press the > key 2 times to return to the current operating
T000148-B

Changing the heating temperature

If an outside temperature sensor or an OpenTherm control
system is fitted, the heating flow temperature is adjusted
automatically.
The symbol D and the current temperature are displayed.
It also possible to modify this setting using the parameter
p1 . ¼ See chapter: "Other settings", page 16.

Modifying the comfort setting (ECO)

mode.
It also possible to modify this setting using the parameter
p4. ¼See chapter: "Other settings", page 16.
MCR 24/28 BIC
170513 - 300024112-001-01