4
User instructions
4.1
Use of the control panel
Fig.3
Step 1
Fig.4
Step 2
Fig.5
Step 3
Fig.6
Step 4
Fig.7
Step 5
Fig.8
Step 6
Fig.9
Step 7
7667004 - v.01 - 12072017
4.1.1
Browsing in the menus
Important
Depending on the devices or control PCBs connected, the con
trol panel shows selection options in some menus.
First, select a device, control PCB or zone to view or amend a
setting.
1. Press any key to activate the controller from the stand-by screen.
MW-3000377-02
2. Access the available menu options by pressing the two keys on the
right simultaneously.
Tab.2
MW-3000299-01
(1) The icon is displayed only if an optional control PCB has been instal
led.
3. Press the
MW-3000300-02
4. Press the
MW-3000301-02
5. Press the
rameter.
MW-3000302-01
6. Press the
MW-3000303-01
7. Press the
MW-3000304-01
Possible menu choices
Information Menu
User menu
Installer Menu
Manual mode menu
Failure Menu
Hour Run Meters / Timer Program / Clock menu
PCB menu
(1)
key to move the cursor to the right.
key to move the cursor to the left.
key to confirm selection of the required menu or pa
or
key to modify the value.
key to confirm the value.
4 User instructions
9