Trigger[N]:Output - Keysight Technologies N778 C Series Programming Manual

4 Measurement Operations & Settings
Command: :TRIGger[n]:OFFSet
Syntax: :TRIGger[n]:OFFSet <value>
Description: Sets the number of incoming triggers received before data logging begins.
Parameters: <value> - an integer value. (maximum possible value is 2147483647)
Response: None
Example: :trig1:offs 5
Affects: All modules
Command:

:TRIGger[n]:OUTPut?

Syntax: :TRIGger[n]:OUTPut?
Description: Returns the condition that causes an output trigger.
Parameters: none
Response: DISabled:
AVGover:
MEASure:
Example: :trig0:outp?
Affects: All modules
Command: :TRIGger[n]:OUTPut
Syntax: :TRIGger[n]:OUTPut
Description: Specifies when an output trigger is generated and arms the module.
Parameters: DISabled:
AVGover:
MEASure:
Response: None
Example: :trig0:outp dis
Affects: All modules
58
Never
When averaging time period finishes
When averaging time period begins
->
dis
Never
When averaging time period finishes
When averaging time period begins
Keysight N778xC Series Polarization Instruments Programming Guide