Keysight Technologies N778 C Series Programming Manual page 78

5 Polarization Commands
Response: Double array (comma separated values)
Example: :PCONtroller:WPLAtes? ->
+0.00000000E+00,+2.50000000E-01,+0.00000000E+00,+2.50000000E-01,+0.00000000E+00,+2.50000000E
-01,+0.00000000E+00,+2.50000000E-01,+0.00000000E+00,+2.50000000E-
01,+0.00000000E+00,+2.50000000E-01
Affects N7785C / N7786C / N7788C
Command: :PCONtroller:SEQuence:LENGth
Syntax: :PCONtroller:SEQuence:LENGth<wsp><length>
Description: Set the polarization controller sequence length.
Parameters: Integer value (0-100000)
Response: None
Example: :PCONtroller:SEQuence:LENGth 5
Affects N7785C / N7786C / N7788C
Command: :PCONtroller:SEQuence:LENGth?
Syntax: :PCONtroller:SEQuence:LENGth?
Description: Get the polarization controller sequence length.
Parameters: None
Response: Int value
Example: :PCONtroller:SEQuence:LENGth? -> +1
Affects N7785C / N7786C / N7788C
Command: :PCONtroller:SEQuence:RRATe
Syntax: :PCONtroller:SEQuence:RRATe
Description: Set the polarization controller repetition rate for each data point in kHz.
Parameters: Double value
78 Keysight N778xC Series Polarization Instruments Programming Guide