Keysight Technologies N778 C Series Programming Manual page 84

5 Polarization Commands
Command: :PCONtroller:STAGe<stage>:DEGree
Syntax: :PCONtroller:STAGe<stage>:DEGree<wsp><orientation>
Description: Set the orientation for each waveplate (lambda/4 plate)
Parameters: <stage> integer value between 1 to 6
<orientation> float value from 0.0 to 359.999
Response: None
Example: :pcon:stag1:deg 75.4
Affects N7785C / N7786C / N7788C
Command: :PCONtroller:STAGe<stage>:DEGree?
Syntax: :PCONtroller:STAGe<stage>:DEGree?
Description: Get the orientation for each waveplate (lambda/4 plate)
Parameters: <stage> integer value from 1 to 6
Response: Float value
Example: :PCON:STAG5:DEG? -> +2.30000000E+01
Affects N7785C / N7786C / N7788C
Command: :PCONtroller:STARt
Syntax: :PCONtroller:STARt
Description: Start the polarization sequence with the configured repetitions, repetition rate, and Sequence Mode
Parameters: None
Response: None
Example: :pcon:star
Affects N7785C / N7786C / N7788C
84 Keysight N778xC Series Polarization Instruments Programming Guide