Keysight Technologies N778 C Series Programming Manual page 65

Command: :POLarimeter:GAIN?
Syntax: :POLarimeter:GAIN?
Description: Returns the gain level
Parameters: None
Response Gain level as integer
Example: :pol:gain? -> +8
Affects N7781C / N7786C / N7788C
Command: :POLarimeter:AGFLag
Syntax: :POLarimeter:AGFLag
Description: Enable or disable auto gain
NOTE - Auto Gain is disabled when setting manual Gain with the POL:GAIN command.
NOTE - Auto gain setting is ignored in Logging / Sweep and Stabilizer Mode.
Parameters: 0: auto gain off
1: auto gain on
Example: :pol:agfl 1
Affects N7781C / N7786C / N7788C
Command: :POLarimeter:AGFLag?
Syntax: :POLarimeter:AGFLag?
Description: Returns the auto gain flag
Parameters: A boolean value:
0 –auto gain is switched off
1 – auto gain is switched on
Example: :pol:agfl? -> 1
Affects N7781C / N7786C / N7788C
Keysight N778xC Series Polarization Instruments Programming Guide
Polarization Commands 5
65